BOREWELL TO OVERHEAD TANK (SEES-BORE)
Automatic Water Level Controller For Single Phase Submersible (bore well) Pumps Panel Driver (Single phase to three phase). This is a unique device for submersible Pump Up to 2.5 HP Capacity. Our submersible panel drive is the most suitable device for start/Run capacitors Panel Driven Water Pumps. It increases the life of motor to work for year. Application Like Residential Buildings, apartment’s, Commercial Complexes, Industrial Buildings, Hotels, Hospitals, . . . .Etc.
Visual Indications :
Four stage water level indicator for over head tank, water flow indication(Running Line), voltage level indication, power on indication and auto/manual indication.
Features: Switch on the panel if water tank is in required mode and switch off the panel at tank full.
Due to faulty foot valve or air leakage in the pipe if the motor runs dry then it gets switched off
automatically and gives fault indication.
Automatic Water Level Controller SEES-BORE automatically switches-off the pump if the supply voltage drops below 160V or Crosses 250V.
Built in surge protection is the Main features of SEES series.
Toggle Bypass Switch.
The optional toggle switch is provided to bypass system operation in case of system failure. so no need to disconnect the system when it gets failed.
Power ON/OFF Switch.
Small rocker switch to select Power On/Off operation.
The product is suitable for almost all site conditions water tank for maintaining level
automatically, can be used to control water inflow or outflow, by means of direct pump control or acting as a control switch of a magnetic or combination starter.
Suitable for Bore well submersible pumps.
In SEES series variants are available for any type of pump, bore well and any combination of tanks.